JL Audio 10W1v3-4 (Pair) Subwoofer + XDM600/1 Mono Amplifier Bundle
Original price was: $1,099.00.$899.00Current price is: $899.00.
Did you like this product? Add to favorites now and follow the product.
+1 864-938-7537 Start Live Chat
Description
JL AUDIO 10W1V3-4 SUBWOOFER
The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v3-4 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.
Specifications
| Continuous Power Handling (RMS) | 300 W |
| Recommended Amplifier Power (RMS) | 75 – 300 W |
| Nominal Impedance (Znom) | 4 Ω |
| Nominal Diameter | 10.0 in / 250 mm |
| Overall Diameter (A) | 10.5 in / 267 mm |
| Mounting Hole Diameter (B) | 9.0625 in / 230 mm |
| Bolt Hole Circle Diameter (C) | 9.7 in / 246 mm |
| Motor Outer Diameter (D) | 4.92 in / 125 mm |
| Mounting Depth (E) | 4.6 in / 117 mm |
| Driver Displacement | 0.037 cu ft / 1.05 L |
| Net Weight | 9.9 lb / 4.5 kg |
| Free Air Resonance (Fs) | 26.15 Hz |
| Electrical “Q” (Qes) | 0.475 |
| Mechanical “Q” (Qms) | 7.243 |
| Total Speaker “Q” (Qts) | 0.446 |
| Equivalent Compliance (Vas) | 1.533 cu ft / 43.41 L |
| One-Way Linear Excursion (Xmax)* | 0.45 in / 11 mm |
| Reference Efficiency (no) | 0.16% |
| Efficiency (1 W / 1 m)** | 84.2 dB SPL |
| Effective Piston Area (Sd) | 53.584 sq in / 0.0346 sq m |
| DC Resistance (Re) | 3.902 Ω |
|
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. |
|
| Wall Thickness | 0.75 in / 19 mm |
| Front Baffle Thickness | 0.75 in / 19 mm |
| Volume (net int.) | 0.55 cu ft / 15.57 L |
| External Width (W) | 16.5 in / 419 mm |
| External Height (H) | 13.5 in / 343 mm |
| External Depth (D) | 7 in / 178 mm |
| F3 | 43.1 Hz |
| Fc | 50.9 Hz |
| Qtc | 0.868 |
|
Enclosure Notes Safety Notice When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |
|
| Wall Thickness | 0.75 in / 19 mm |
| Front Baffle Thickness | 0.75 in / 19 mm |
| Volume (net int.) | 0.9 cu ft / 25.5 L |
| External Width (W) | 17.0 in / 432 mm |
| External Height (H) | 11.5 in / 292 mm |
| External Depth (D) | 15.25 in / 387 mm |
| Internal Slot Port Width (SW) | 1.125 in / 28.6 mm |
| Internal Slot Port Height (SH) | 10.0 in / 254 mm |
| Internal Slot Port Length (SL) | 30.1875 in / 767 mm |
| Port Extension Length (EL) | 12.50 in / 318 mm |
| Tuning Frequency (Fb) | 32.17 Hz |
| F3 | 31.92 Hz |
|
Safety Notice When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. |
|
AMPLIFIER HIGHLIGHTS
Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω – 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don’t let its small size fool you, though… the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
AMPLIFIER SIGNAL PROCESSING
| @ 4 Ω | 400 W RMS x 1 |
| @ 3 Ω | 500 W RMS x 1 |
| @ 2 Ω | 600 W RMS x 1 |
| @ 1.5 Ω | N/A |
| @ 4 Ω | 300 W RMS x 1 |
| @ 3 Ω | 400 W RMS x 1 |
| @ 2 Ω | 500 W RMS x 1 |
| @ 1.5 Ω | N/A |
| Frequency Response | 7 Hz – 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >67 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >1000 / 50 Hz |
| Damping Factor @ 2 Ω | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV – 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz – 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz – 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Related products
JL Audio M6-880X-C-GW-GW-i – 8.8″ Marine Coaxial Speakers with Classic White Grilles
Original price was: $700.00.$500.00Current price is: $500.00.
JL Audio XE-BLKAIC2-12 2-Channel, 12 ft (3.66 m) Premium Audio Interconnect
Original price was: $108.00.$89.00Current price is: $89.00.
JL Audio 10TW3-D4 10″ Shallow-Mount Subwoofer – Dual 4 Ohm
Original price was: $350.00.$280.00Current price is: $280.00.
JL Audio M3-10IB-S-GM-4 10-inch Marine Subwoofer Driver (175W, 4 ohm)
Original price was: $350.00.$290.00Current price is: $290.00.
Copyright 2025 © Audio soundwave solutions. All right reserved
Reviews
There are no reviews yet.